Ok here is the progress made so far.
this is the part im working on right now
sanded down
after adhesion promoter, and 2 coats of primer
after 4 coats of paint
Ok here is the progress made so far.
this is the part im working on right now
sanded down
after adhesion promoter, and 2 coats of primer
after 4 coats of paint
2008 GMC Sierra
1998 GMC YUkon 4X4
2007 Kawasaki Vulcan 900 Custom
looking good... you going to clear it tomorrow
yeah, gonna let it sit over night. I was told to sand the paint, im just afraid of going down to the primer....
what # of sand paper should I use to sand the paint? This is the first time I do something like this by the way (if you hadnt noticed)
Gonna do the plastic arount the radio tomorrow. I sprayed the first 2 coats of primer after the adhesion promoter, then sanded it down smooth and re primed it. Ill continue to sand/prime tomorrow as well. I really wanna see how that first piece is gonna come out.
2008 GMC Sierra
1998 GMC YUkon 4X4
2007 Kawasaki Vulcan 900 Custom
when i wet sanded my stuff i used 1000 grit just to be safe
ok, ill use 1000.... what if it hits the primer?
what am i looking for when I sand the paint itself? same amount of smoothness as when I sanded the primer?
2008 GMC Sierra
1998 GMC YUkon 4X4
2007 Kawasaki Vulcan 900 Custom
Just smooth it out, like take out the orange peel look... im not a paint expert im just going off experience... i have painted the interior parts in 3 of my trucks so im just going by what i learned and have been told... and use alot of clear... i did
will continue tomorrow, looks like it should turn out pretty well..... for my first time lol
2008 GMC Sierra
1998 GMC YUkon 4X4
2007 Kawasaki Vulcan 900 Custom
Posting Permissions
Reply With Quote
