When is shows black prime apply primer again
When is shows black prime apply primer again
DANIEL CAMMED SS 13.46 @ 98.17-- 8.58 @ 80.31
2003 Silverado SS / LQ9 6.0L / Wheatley 93 Octane Tune / 224/228 .581 .588 110lsa / Patriot Gold Dual Springs / Comp Hardened Push Rods / Circle D 3800 stall / Pacesetter LT's / 4:10 Gears / Transgo HD-2 Shift Kit / K & N Cold Air Intake / Corvette Servo / Aeroforce Interceptor / Autometer Narrorband(Wideband on the way) / Mobile 1 Synthetic / Single Chamber Flows with X Pipe / Cats Delete with Cutouts
Spray can or gun? Spray can coats go on a lot thinner.
2006 SilveradoLittle Black Bitch
im using a spray can. i think im good to go. the "pores" arent there anymore. im also using can paint, made by napa according to paint code and matching clear coat. how many coats of paint should i apply? and how long should i wait between paint coats. and, how long after the paint is on should i wait to spray the clear, and how many coats should i apply?
thanks again
2008 GMC Sierra
1998 GMC YUkon 4X4
2007 Kawasaki Vulcan 900 Custom
usually it says on the can how long to wait between coats.... are you gonna post some pics after you get it all painted
yes sir, will be posting pics when im done. the can doesnt say how long to wait between coats. the primer does. a buddy said to wait about 10min between coats, then let it sit over night. then sand the imperfections then clear coat it.
2008 GMC Sierra
1998 GMC YUkon 4X4
2007 Kawasaki Vulcan 900 Custom
Ok here is the progress made so far.
this is the part im working on right now
sanded down
after adhesion promoter, and 2 coats of primer
after 4 coats of paint
2008 GMC Sierra
1998 GMC YUkon 4X4
2007 Kawasaki Vulcan 900 Custom
looking good... you going to clear it tomorrow
Posting Permissions
Reply With Quote
