nitrous newbie bout some stuff. but what all do i got.

[Botlfed]

ARMING SWITCHES AND BUTTON FOR 1ST AND 2ND STAGE, SWITCH ON LEFT IS 1ST STAGE WIRED TO A WOT SWITCH, SWITCH ON RIGHT IS FOR 2ND STAGE WIRED TO BUTTON


NITROUS BOTTLES WITH FEED LINE AND BOTTLE HEATERS


SWITCHES TO TURN ON BOTTLE HEATERS.


1 FUEL SOLENOID WITH 2 STAGE PLATE


ANOTHER FUEL SOLENOID


2 NITROUS SOLENOIDS


STAND ALONE FUEL PUMP

3/4 GALLON FUEL CELL, FILLED WITH RACE GAS FOR STAND ALONE SYSTEM, AND YOU CAN KINDA SEE THE REGULATOR.


NOW A 2 STAGE SYSTEM SHOULD BE PRETTIER THAN THIS BUT IM LAZY AND DONT FEEL LIKE ORGANIZING IT but there is no teflon or that other thing you got goin on there you might just wanna buy the extra noids and such to have it set up right.

[pl4yboy]

NOW A 2 STAGE SYSTEM SHOULD BE PRETTIER THAN THIS BUT IM LAZY AND DONT FEEL LIKE ORGANIZING IT but there is no teflon or that other thing you got goin on there you might just wanna buy the extra noids and such to have it set up right.

Garrisson, just out of curiousity... My plate faces the other direction. The holes for the nitrous/fuel spray are angled a certain way. Mine are facing correctly. Have you had any problems with it spraying with it turned around backwards? Or is yours different than mine? It looks like an identical plate.

[Botlfed]

Mine was literally one of the 1st 90mm plates made for a truck, I know they took a tbss plate and modified it, mine is on correct

[Show&Go]

Sometimes a good deal isnt a good deal to put on your truck... If you got the whole kit Id still swap to some new noids and clean out every line on it. If you wanted to run a dry kit you can pick up a brand new one for around 300 with bottle and all...
But I digress. If you want to run a dry kit spray before the MAF sensor... Dont try to hook it up like mustang...

[pl4yboy]

Speaking of new solenoids... I need to go ahead and buy 4 new ones.