Ok so I have just bolt ons really on my 04, mods in sig. Me and my buddy were logging the other day and my idc is peaking at 80% under wot. Do I have enough injector to support a cam heads and about 150 shot? Prolly not, so how big of injectors do I need?
04 RCSB 5.3, Homemade 80mm FM, TU1, TH400
Anybody?
04 RCSB 5.3, Homemade 80mm FM, TU1, TH400
for full bolt ons, 42s are usually plenty. Think they will support around 5psi. For a shot, you might just want to go with 60's to be on safe side.
blown transmissions are about as useful as 97% of the guys on this forum
so would allen's 48 pounders do?
04 RCSB 5.3, Homemade 80mm FM, TU1, TH400
might as well go 60's
Blessed be the Lord my strength which teacheth my hands to war, and my fingers to fight:
Psalms 144:1
Si vis pacem, para bellum
K cool
04 RCSB 5.3, Homemade 80mm FM, TU1, TH400
I spray 150 on my stock flex fuel injectors... with full bolt ons my IDC is around 65%.
1969 Chevy RCLB C10 350/TH400 SOLD
2007 Chevy RCSB 4.8 4x4 LS SOLD
2008 Chevy RCSB 5.3 4x4 LT SOLD
2010 Chevy CCSB 6.2 4x4 LT SOLD
2005 GMC CCLB DRW 6.6 Duramax 4x4 191,000 and counting
2013 FORD CCSB F350 6.7 Powerstroke 4x4
yea but i plan on putting a decent sized cam, heads, and a proflow mani too, so i dont think those stock flex fualies are going to be enough. Arent they like 30 lbs?
04 RCSB 5.3, Homemade 80mm FM, TU1, TH400
anything above 50 should be fine, but 60s are insurance for future mods, plus a aftermarket fuel pump
Simple: 408 on steroids!
single digits coming soon!
k sounds good
04 RCSB 5.3, Homemade 80mm FM, TU1, TH400
Posting Permissions
Reply With Quote
