Dude, those are 13 a piece. nelsonperformance sells a whole set of pigtails for 35. if you don't want to solder the factory harness, you can get away with heat shrink butt connectors.
i was going to buy the 'adapter' harness, but for that kinda money, and what you spent on your injectors, you could have just got direct plug ins from the start.
blown transmissions are about as useful as 97% of the guys on this forum
Its a complicated back story, But im finishing a project for my buddy that he started. He bought a 6.0 truck motor and wants to use a LS6 intake/fuel rail on it now AFTER he ordered his truck harness already...After i talked to him this morning we decided to try to get the truck fuel rail/injectors to work with the LS6intake...
A picture of it;
Posting Permissions
Reply With Quote