+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: Will these injector adapters work for me?

  1. #1

    Will these injector adapters work for me?

    Just hoping these will work. Wanting to use these car injectors with my truck harness.

    http://www.monstermarketplace.com/Au...15a196152.html



    My car injectors



    My truck harness



    Thanks! Just want to make sure before i order them.

  2. #2
    Join Date
    May 2009
    Location
    Plainfield, IL
    Posts
    2,036
    you have a 'mini delphi' or 'multec' style harness in your truck (i've seen them referred as both).

    I can't tell if those injectors are ev6 or not. You could buy those adapters, cut them, and solder them into your truck, but it won't be a direct plug in.
    blown transmissions are about as useful as 97% of the guys on this forum

  3. #3
    Ok dudes, Thanks to oleshifty and some additional research, I found some adapters that i think will work! Turns out im pretty sure i have the EV1 connectors. So i need this adapter

    http://fuelinjectorconnection.com/sh...&productId=217

    Jugging by this pic;

  4. #4
    Join Date
    May 2009
    Location
    Plainfield, IL
    Posts
    2,036
    Dude, those are 13 a piece. nelsonperformance sells a whole set of pigtails for 35. if you don't want to solder the factory harness, you can get away with heat shrink butt connectors.

    i was going to buy the 'adapter' harness, but for that kinda money, and what you spent on your injectors, you could have just got direct plug ins from the start.
    blown transmissions are about as useful as 97% of the guys on this forum

  5. #5
    Its a complicated back story, But im finishing a project for my buddy that he started. He bought a 6.0 truck motor and wants to use a LS6 intake/fuel rail on it now AFTER he ordered his truck harness already...After i talked to him this morning we decided to try to get the truck fuel rail/injectors to work with the LS6intake...

    A picture of it;

  6. #6
    Join Date
    May 2009
    Location
    Plainfield, IL
    Posts
    2,036
    you can still cut/solder nelson's ends on. looks like you have your work ahead of you...an extra hour putting on injector plugs won't hurt anything lol.
    blown transmissions are about as useful as 97% of the guys on this forum

  7. #7
    Join Date
    Nov 2009
    Location
    Fort Smith, Arkansas
    Posts
    496
    93blackbeast has a truck harness with an ls1 intake in his swap so it can be done. But, I think he used aftermarket injectors.....
    '91 2WD RCSB
    5.3l L59 DBW
    4L80E
    TR220 cam
    RevMax 2800rpm stall converter
    Schoenfeld LT Headers
    Nelson tuned

    My Truck Video - http://www.youtube.com/watch?v=Rw9y1...&feature=email

  8. #8
    Join Date
    Feb 2010
    Location
    Odessa, texas
    Posts
    916
    is it just me or is that some custom clearencing on the waterpump tube that comes out the top

  9. #9
    Good eye... That was an "experiment" if you will... It has a vette pump on it now.

  10. #10
    see,

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts