08 ls2 into an 02 1500. What's involved?

[La Ricky Bobby]

There are a few things....the reluctor wheel needs to be changed from 58x to 24x. Or buy the electronic box. The Cam position sensor is on the front of the block and the wires will need to be changed... just swap A and C. The knock sensors will have to be relocated to the sides of the block. If the motor has DOD or VVT that will have to be removed. Also a possible lifter and tray swap and valley cover....

wut has 2 be changed if im putting an 05 lq4 into my 1994 GMC ecsb? just the major i know reluctor,crossmember moved back, motor mounts driveshaft, efans,yoke, and a nelson harness, wut am i missing? sorry 2 interupt ur thread SS..but wut he said is wut has 2 be done..go with his advice

[flattopwill]

wut has 2 be changed if im putting an 05 lq4 into my 1994 GMC ecsb? just the major i know reluctor,crossmember moved back, motor mounts driveshaft, efans,yoke, and a nelson harness, wut am i missing? sorry 2 interupt ur thread SS..but wut he said is wut has 2 be done..go with his advice

You dont have to swap a reluctor wheel as long as you have a matching computer. You dont need to change the motor mounts just get motor mount adapter plates. And depending on which trans you plan to use you might need to change flexplates. Also depending on which trans you use you might not need to have a different driveshaft. Youll need gauge sending unit adapters to make your gauges work.

[La Ricky Bobby]

You dont have to swap a reluctor wheel as long as you have a matching computer. You dont need to change the motor mounts just get motor mount adapter plates. And depending on which trans you plan to use you might need to change flexplates. Also depending on which trans you use you might not need to have a different driveshaft. Youll need gauge sending unit adapters to make your gauges work.

Im using the matching 05 4L80e.and i have the complete wiring harness and ecu...where i do look 4 the gauge sending unit adapters?