-
no i didnt measure it they are the stock pushrods. the guy said i may need 7.5 length pushrods.
-
If you installed the appropriate springs with the cam, you really should invest in hardened pushrods. The factory units are the weakest link in your valvetrain. 7.5" pushrods will be way too long. It's best to measure using an adjustable pushrod, but if you can't, I would suggest using 7.425".
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Reply With Quote