62...they are completely stock, only run on the car(Z06) for a few thousand miles.
62...they are completely stock, only run on the car(Z06) for a few thousand miles.
Last edited by Smoky02; 05-12-2010 at 07:38 PM.
stock 243's are 64.45 cc ....
blown transmissions are about as useful as 97% of the guys on this forum
I actually put that first, and then went and changed it. But they would be outside of your CC range unless you wanted to get them milled before installing.
ya, I don't want to pay 700 before any machining. I can get a set machined/built for about 1000
blown transmissions are about as useful as 97% of the guys on this forum
But will the ones that you get that are machined and built have the patriot dual springs with max lift of .660? if that's to high make an offer.
The price on the heads isn't terrible...it's just not what I need. Those will lower my compression to around a 9:1, so I will need to have them milled down, clearances checked, etc.
Brand new 59cc 5.3 heads are only 1200. I can have my stock heads worked for around the 700 (includes buying springs).
blown transmissions are about as useful as 97% of the guys on this forum
Okie dokie...good luck
Posting Permissions
Reply With Quote
