Coolant Overflow bottle

[flattopwill]

Just use the stock '92 radiator and matching overflow bottle. Then get the radiator hoses for a 99+. And yes you can use the old heater return inlet for the steam line IF you can find a big enough reducer. I couldnt but it looks like low91 did. It takes like a 1/2" to 1/4" reducer.

[coastsidekid]

I plan on trying to run the radiator that i found, and use the heater return port on the radiator for my steam line. i cut out some of my front support to get more air to it.

[coastsidekid]

Does anyone know the size of the hole and what type of thread for the engine oil input and output from the radiator?

Also anyone happen to know what size the engine cooler lines are from the 6.0 so i can order the correct AN line to route to the radiator. THANKS

[flattopwill]

Does anyone know the size of the hole and what type of thread for the engine oil input and output from the radiator?

Also anyone happen to know what size the engine cooler lines are from the 6.0 so i can order the correct AN line to route to the radiator. THANKS

?!!??
Please dont put engine oil in the radiator........
What you talkin bout?

[coastsidekid]

The radiator has provisions for the engine oil and also transmission fluid. Just like my stock radiator had.

[BigMac]

you can make anything work if you spend enough time walking around Home Depot...Hell I've seen Jack Daniels bottles used as coolant overflows before.

[coastsidekid]

you can make anything work if you spend enough time walking around Home Depot...Hell I've seen Jack Daniels bottles used as coolant overflows before.

Thanks bud, got the overflow bottle taken care of.