Got the cam in but still waiting for the springs to get here and painted a few things while it was torn down. The specs on the cam are 212/218 .557 .562 115+4. It was a brand new custom spec'd comp cam. It wasn't spec'd for my setup but it was close enough to what I wanted and it only cost me $255. I'm no cam expert so I got a few questions for those who are.

1. What type of stall would you recommend for this cam?I'm sure more info is needed so just ask what you might need to know. I have a 1800-2k that I bought with my transmission, I'm hoping it will be enough. I want to go with as small of a stall as I can without issues.

2. I measured the base circle of the new cam at 1.49 and the stock cam at 1.55. Will I need longer push rods?

3. Anyone care to guess what the power range of the cam should be? Heres the valve timing specs: int.open 5-BTDC, int.close 37ABDC, exh open 48BBDC, exh close 10-ATDC.

4. How well would it respond to forced induction?