its from cx racing, it was cheap and works really good. at 10 pounds of boost my iats are around 75-85 degreesOriginally Posted by GMCtrk
its from cx racing, it was cheap and works really good. at 10 pounds of boost my iats are around 75-85 degrees
I like your boost gauge location. Only bad thing is you loose the use of the vent.
I REALLY wanna get one of these kits for the truck....Allen do you need a truck to test fit with?
T-RAV99 GMC | 5.3 | Skinny White Guy Tuned
badass!
Thats a clean A$$ set-up!
WHIPPLED 05 SIERRA
thanks man, i just through it together after hours at work still got a lot of work to get it the way i want it.
Who made that AC Gauge pod in carbon?
A.J.
RCSB GMC SIERRA 00
i bought a sheet of carbon fiber and cut it out by hand, then took the vent all apart and fit the carbon fiber piece in. took about 2 hours but i have never seen it before so i wanted to try it. plus i always use the floor heat and never use the vents.
if you want one made just let me know.
http://www.ls1truck.com/forums/power...iver-vent.htmli bought a sheet of carbon fiber and cut it out by hand, then took the vent all apart and fit the carbon fiber piece in. took about 2 hours but i have never seen it before so i wanted to try it. plus i always use the floor heat and never use the vents.
if you want one made just let me know.
T-RAV99 GMC | 5.3 | Skinny White Guy Tuned
Posting Permissions
Reply With Quote
