Spindles - McGaughys vs. Belltech

[Frenchy]

Ok and go, why is there such a price difference? Anyone have experience with both? I'm tired of being in the nosebleed section

[408.Luke]

I had beltech on the SS... get the McGaughys thats what ive been told anyways

[Wtfan18]

well i did a bit of research on these as i just did a 2 inch spindle on my RST, the Mcgaughtys claims you can run a 16" inch or bigger wheel while the belltech is a 17 or bigger but i will never run anything less than a 20 so it didnt matter so i bought belltechs locally from a shop i worked as as they couldnt get mcgaughtys or i would have gone that route. also with the belltech kit they expect you to cut your balljoint stud A LOT and use a tiny quarter inch thick nut to hold it on... no thanks... so i left it stock length and i have less than an inch from the bottom of the balljoint nut to the wheel but it dropped it two inches 8P. ahah.