Gen III 5.3 To Gen IV 6.0 (LY6) 2004 Avalanche

[molitor]

i would get the module before even thinking about pulling the crank, other than that, you'll need to change your knock sensor setup, and possibly a few connectors or sensors

[spacediver]

i would get the module before even thinking about pulling the crank, other than that, you'll need to change your knock sensor setup, and possibly a few connectors or sensors

Thats the direction I was thinking. I would like to source all the items I need to make this happen so I can do the swap and be on the road in the corse of a weekend.

Lingenfelter does have a conversion module to go from 58x to 24x
Knock Sensor extension harness and injector adaptors. I just want to make sure I cover all my bases.

All input is more than welcome this will be my first swap.