Need Help finding a table.

[clementeunknown]

I'm looking for the Idle Startup Airflow Initial vs ECT table on an 05 Silverado ECU. This is the table that you modify so you won't have to pump the gas to start the vehicle after a cam install. I can't seem to find it or is it under a different name? Thanks in advance.

[casey23]

I'm looking for the Idle Startup Airflow Initial vs ECT table on an 05 Silverado ECU. This is the table that you modify so you won't have to pump the gas to start the vehicle after a cam install. I can't seem to find it or is it under a different name? Thanks in advance.

umm... i never had to pump to throttle to make one start... whats your setup?

[clementeunknown]

F.B.O & 222/224 cam. Well to be more specific the table you modify so you won't have to use the throttle to keep the vehicle on idle so it won't die out

[farmtruc]

Adjust the running airflow table by about 2 points, start from there.
go too far and you'll notice the truck has a cruise control effect when in gear and idle hangs during decel.

that's the table you want.

[clementeunknown]

Will do thanks for the info.

[casey23]

Adjust the running airflow table by about 2 points, start from there.
go too far and you'll notice the truck has a cruise control effect when in gear and idle hangs during decel.

that's the table you want.

yeah.... what he said