Chris @ Circle-D did me a huge favor the Friday before the SAR event. I burned up the trans on the dyno the Thursday before and he built me a new converter and had the tranny shop replace the clutches in the tranny that friday (same day turn around). When I got it all back together, the converter was having some major issues (locking up as soon as the truck started rolling), and prevented me from participating in the SAR festivities. I refered to the truck/tranny/converter as being a "piece of sh*t" in another post on this website. Well, long story short the problem was not in the converter, and had nothing to do with anything Circle-D did. The problem ended up being a stuck lock-up solenoid in the tranny (not a typical problem, and rarely replaced) as a result of the trash from the burned up clutches. Its been replaced, and all is well. Thanks Chris.