servo install

pop the snap ring out with a flat head

take a pair of plyers to pull the cover off...i didnt cut my o-ring like everyone was saying to do

pull the whole servo assembly out with your fingers

pull the 4th gear servo off remember which way it goes or you'll screw up

easy stuff...shouldnt have to explain it in full detail. but pull your E clip make sure you dont lose it. pull everything apart 1 peice at a time and lay it exactly how it would come off the servo pin

take a small C clamp, a socket, a peice of foam or a small towel to press the plate in to expose the inside spring to install the Blue spring that comes in the shift kits

place the blue spring inside of the old spring and repeat the steps in reverse
any problems ask ill explain in more detail..it's not that hard :cheers: