Performance parts 4 sale

[MidnightRider]

The following items are forsale from my twin kit they have little to 0 miles on them. Nothing im selling has anything wrong with them. Everything is OBO. Please no silly or stupid remarks on my thread. Thanks everyone for looking.

1-Hpm(danny tranny) 4l65e 2WD /w Yank SC3000. condition=excelent (2000$)+ shipping If i have to separate It will be 1750 for tranny and 650 for the Yank

This unit has 7k on it. The tranny works and shifts flawless. If you need to talk to the builder i can get you his number. I dont want to separate the Yank SC3000 from the sale. The Converter still has the free restall from yank if you want it different. this is the billet cover 1000$ converter. Shipping is about 150 on the tranny and 45 on the verter.


Specs on the trans are as follows

Superior shift kit
corvette servo
File fit servo pin
1-2 accumulator piston aluminum
forward accumulator aluminum
rpm spring kit
alto red eagle 3/4 clutch pack with 9 clutches and kollen steals
alto clutches for all other frictions
carbonite wide band with reinforced anchor
entire valvebody blueprinted
rear slinger planetary ( 4 pinion hardened with reinforced ring)
29 element dual cage input sprag
350 lock up front stator bushing
bronze case bushing replaced with babet bushing
bleed orifice drilled in input housing
blocked third gear accumulator exhaust
Beast sunshell
New lock up solenoid
New shift solenoids
New internal wiring harness
Trans go separator plate




2-Edelbrock Coil covers w/ LS1 coils. condition=excelent (230$) shipped

These are already modified for the trucks to fit around the altenator and fire wall. They have the required LS1 coils. they looked great with the intake but im going another route for the LSX


3-LS7 lifters. condition= new (110$) shipped (SOLD)
never run got them from 408luke i cant use them in the LSX block




4-Delphi mini 62lb 650cc/min injectors condition= excelent with low miles (375$) shipped
These are the short truck style injectors all flow matched
8 - Multec II - 62lb, 650cc/min Fuel Injectors - NEW:eBay Motors (item 370269752989 end time Dec-02-09 15:36:12 PST)

Fuel Injectors MOD Sets - Siemens Injectors & Lucas Injectors - Racing Fuel Injector Sets



5-stock 4.8 5.3 6.0 injectors condition 55K miles (75$) shipped they worked fine wheni upgraded to the radix a while back they have been in proper storage since

[MidwestSS]

boy i'd love those lifters, but not at this time.. getting my cluster fixed\altered and my arm rest fixed up first. hope you have those in a couple weeks.. but prolly not

[Duct_tape123]

What is up with the pic of the buggered lifter?

[MidnightRider]

What is up with the pic of the buggered lifter?

there is nothing wrong with the lifte.r that is fresh oil these have never been run hense the upclose pick so you can see there is no scaring

[Duct_tape123]

Alright, couldn't tell that it was oil. Thanks for clearing that up!

[pl4yboy]

These lifters would come in handy for anyone doing a cam swap in a NNBS by the way... Wish I had the cash for them ATM.

[hillbilly6.0]

but those will work in a 2000 lq4?

[SLO TRUCK]

but those will work in a 2000 lq4?

sure will

[juliaroberts981]

I stumbled upon https://spino-gambino-casino.com through a Canadian gaming channel on Telegram. People were discussing their favorite slots, so I decided to check it out. I liked how fast everything loads, and the gameplay feels smooth even on mobile. I had a round where I was convinced I’d lose, but a bonus spin feature saved me and left me ahead. Those unpredictable moments make it more than just a game—it’s a fun little challenge.