+ Reply to Thread
Results 1 to 10 of 44

Thread: Launching in 4H

Hybrid View

  1. #1
    Join Date
    Mar 2009
    Location
    Oolitic In
    Posts
    162
    I launch in 4hi and hit 115.... The week part in these trucks for the front is the tie rods easy to bend... They make sleeves for them or u can buy after market tie rods that are like a 1/2in thick I think.. Then they have some with hime (sorry about spelling) joints ends not the ball joints... If u go watch the 09 camaro vs 05 silverado thred that's me doing my 4hi and u can see that the wheels toe in on that launch ill be getting the after market tie rods cause their either going to bend or snap if I keep launchn it like that hope that helps

  2. #2
    Join Date
    Sep 2007
    Location
    H-Town
    Posts
    212
    Maze, ever looked into the Cognito steering braces? Those along with some stout sleeves and some QA1 double adjustables made a world of difference on the front end for me. Also kept me from throwing my alignment out every trip to the track. I would guees you are high 11s with the 115 trap speeds?
    Last edited by Sizzle Chest; 11-05-2009 at 08:12 PM.
    ________________________
    2006 2500HD, RCLB, 4X4
    6.0, 4L80e, 14 bolt

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts