i'm calling her Mia

[Lsx10]

small update for you guys, was busy with house stuff most the weekend, but I got some stuff done and inching closer to being done.



coil brackets on and wired, still need to grab some spark plug wires.







got my bed on and the filler neck fabbed up, had some 2 inch exhaust pipe bent up for me, then I welded on the top of the stock filler neck so the cap works, and weled on the small vent hose. Its functional but not done, i'm going to bend up aluminum sheet to make a nice cover for that ugly hole.













I got the core support on but no pics, I need to go make a junkyard run and grab a few things at the parts store, i'll have another update in the next few days.

[68 TT]

small update for you guys, was busy with house stuff most the weekend, but I got some stuff done and inching closer to being done.



coil brackets on and wired, still need to grab some spark plug wires.

The relocated coils look great there. Might need to make some plug wire support looms to keep the wires off the header tubes now.

Any trouble finding build them yourself plug wire sets for the LSx?

[Lsx10]

The relocated coils look great there. Might need to make some plug wire support looms to keep the wires off the header tubes now.

Any trouble finding build them yourself plug wire sets for the LSx?

shouldnt need one, there are kits to put your coild right there by a few people who make aftermarket valve covers, I can get theres if I need to. these are only set about an inch or so higher then the round coils so regular wires should work. i'll try to find my stock wires tonight to check before I order a set of msd wires.