David, he's talking about notching the center of the bed for the pumpkin.
I personally didn't, but I need to. I know at one time Belltech used to include a notch for the bed crossmember along with their c-notches, but I'm not sure about anymore.
David, he's talking about notching the center of the bed for the pumpkin.
I personally didn't, but I need to. I know at one time Belltech used to include a notch for the bed crossmember along with their c-notches, but I'm not sure about anymore.
Fo Sho. Check the pinion angle.Originally Posted by duckysbht
Did you have an alignment done?
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
this has already been said but check your pinion angle i have a few friends that do have a 4/6 drop with a flip kit and it threw off the pinion angle and you may want to also get a alignment done also.
Posting Permissions
Reply With Quote
