got my lowering kit on, few questions

[dru34]

alrite just got my djm 4/6 drop on with 1'' rear shackles, so a 4/7 drop, i am using stock shocks, anyway in the rear it bounces real bad can fill every bump, im not scrubing at all and my notch is in the right place, question is, what can i do to improve the ride quality? or does it come with the territory? would lowered shocks help alot or what, thanks for any help

BTW:will have pics up tonight, looks awsume!

[conekiller01]

im no drop expert but ive heard from A LOT of people that about a 4in drop and the shocks are maxed out ...i bet some drop shocks would help you at a bunch! get those pics!!

[smoothdime]

shocks are meant to operate in the middle of their travel range. yours are probably completely compressed. you need drop shocks for the amount of drop you have. if you have 4" drop control arms up front the factory length shocks are fine. hope this helps you. gary

[banker099]

your back shocks are probably bottomed out, u need drop shocks...or shocks for an 89 ford aerostar

[dru34]

ok great, thanks fellows, pics coming up tonite

[dru34]

would the ford aerostar ones work?

[banker099]

thats whats on my truck

[MYSHTBX]

not to jack the thread but the stock front shocks will work in the front with a 4 inch lowering control arm?... cause mine rides like crap up front...it feels like its all over the place, i dont know if its my drop shocks or what but i have my factorys layin around...

[dru34]

going to autozone tomaro for some $17 shocks,

[banker099]

not to jack the thread but the stock front shocks will work in the front with a 4 inch lowering control arm?... cause mine rides like crap up front...it feels like its all over the place, i dont know if its my drop shocks or what but i have my factorys layin around...

yep with control arms u run stock front shocks