So maybe then others can see how hard this is for fixers.
So maybe then others can see how hard this is for fixers.
carb'd LS6... that sounds fun!
as for the LS7 clutch, etc, i don't really know if it'd work or not. i'd say just go to your parts counter & grab a 4.8 flywheel & try to bold one up. i know the 4.8/5.3 flywheel is not interchangeable with one off an LS1... or at least that's what i've been told by quite a few different places. the t-56 & nv3500 slave cylinders are swappable, i know that.
00 FRC - just top end, exhaust, and a hot-air intake
99 Sierra - 5.3 / 5spd
↓ click the pic for the build ↓
wait... you'll be using an LS6 flywheel, correct? i thought you were wanting to reuse your old one, but even then - you have a 4.3, not a 4.8
what i do know is that you can't use an LS1 flywheel with a 4.8/5.3, but that's an issue of bolting to the crank. i have no clue whether or not an LS6 flywheel will mate to this transmission... but it will easily go with a t-56, which is what you'll be probably be looking for in the future.
00 FRC - just top end, exhaust, and a hot-air intake
99 Sierra - 5.3 / 5spd
↓ click the pic for the build ↓
Done yet?
2006 SilveradoLittle Black Bitch
Done yet?
Posting Permissions
Reply With Quote
