Magnacharger TVS1900 Truck Kit

[kbracing96]

This is a Magnacharger, TVS1900 Tuner Kit that I ran as a compound setup with a turbo on my 2001 GMC truck. The supercharger has apox 8000 miles on it and works perfectly. It is currently still on the truck but is coming off in the next 2 weeks or if someone buys it sooner.

This is what you will get...

*TVS1900 front drive/front inlet Compressor, intercooler and lower manifold
*3.3" and 3.6" pulleys
*Front bracket, tensioner assm, and belt
*Valley pan cover needed for this blower
*Fuel rails and adapter for return style fuel system
*Custom made 2 core, over sized heat exchanger that is direct bolt in for 99-02 trucks
*Magnacharger water pump and reservoir container.
*Bracket I made to bolt throttle cable to supercharger


Things you will NEED to complete the kit...

*Fuel injector and fuel pump or Boost-A-Pump
*4bolt 90mm TB
*Air tube to from air box to TB
*Tune
*Installation instructions

$4200 plus shipping and Paypal if used, OBO
Some Pic...





Heat exchanger


Magnacharger valley pan

[farmtruc]

OBO? $1000 dollars!

[sprayedenali]

$1001!!!!!

[farmtruc]

100000 million dollars!
Jk KB, nice kit and whoever gets this will be very happy with the performance!

So just a turbo now huh?

[kbracing96]

100000 million dollars!
Jk KB, nice kit and whoever gets this will be very happy with the performance!

So just a turbo now huh?

Haha! A grand would be a nice DEPOSIT! lol

Yep, with a nice little quick spool valve

[HarleyDave]

Man I really want to FI my truck, this will work on a '99 6.0? It looks like a w/a intercooler? What kind of boost without the turbo feeding it?

[kbracing96]

Ya, it will work on that motor. It is a w/a intercooler, like all the maggys. On my 5.7, the 3.3 pulley would make about 7 psi by its self, so with a 6L would be a little less. You can always put a smaller pulley on it for more boost. Generally you can go as small as 2.8 on these blowers.

[kbracing96]

Bump

[White Devil]

What does it make it better than MP122?

[kbracing96]

It's a much more efficient compressor which makes for lower IAT's guys who have had both the MP122's and these TVS's say its a GREAT improvement, plus it's a front inlet, no need for the J tube like the MP122 truck kits have.