5.3 & 4l60e for 800?

[1980c10]

do you have 2 old tires w no rims? use that to set the motor on then strap it down, should work fine instead of the rims. if the rims is all you have be careful with the way the motor is set on them. (you could turn the corner and the motor rock hard an run risk of chipping or cracking the oil pan) if the motor is still bolted to the tranny then you should be ok setting it flat in the bed and strapping it down

i forgot to ask if it was still bolted together, but i brought home to used tires
with no rims from work today just in case.

[1980c10]

ok, i went to pick up my engine and trans today, looks good. i'll try to get a pic soon. the guy had a computer but it doesnt look like the one ive seen on here and on ebay. it says motronic. it looks like this. i dont think this the ecm is it?

[keniff]

my 04 6.0 ecm didnt look like that...an it dont look like my 08 ecm

[GasGuzzler]

That's unlike ANY GM module for any GM system I have ever seen. Does it plug into anything on the harness? Then again it might be worth $8769876565.90?

[1980c10]

no the harness is cut so i dont know, when i type motronic in on ebay mostly pure bmw ecm's come out, but they dont look like this

[keniff]

lol f it just shop for a harness and ecm an throw that one away!

[1980c10]

yup, i think thats what i'm gonna do. i'l just look for dbc harness and computer and swap my tb