+ Reply to Thread
Page 3 of 3 FirstFirst 1 2 3
Results 21 to 27 of 27

Thread: awd 4.8 5speed s10

  1. #21
    Join Date
    Feb 2009
    Location
    mississippi
    Posts
    930
    anyone who iv ever talked to who has had a 80e tbrake seas that it responds real slow i dont no personally thats just what i have been told by alot of pep
    04 1500 5.3L custom hp tuners tune by myself don have a pic of it yet so hear is my old 01 chevy 5.3 460hp 13.669 @ 116

  2. #22
    In my opinion. AWD will not be worth the effort for manual trans. 6 speed or Awd automatic. Then again wasn't the summit quadra duace 6 speed. . . .Not sure about that one and cant find anything online about it. I always wanted that car.
    99RCSB Broke because I wasted thousands and thousands of dollars on my truck.

  3. #23
    Join Date
    May 2008
    Posts
    315
    I have heard of people using a t5 out of a mustang to work with the ls series motors. they should be a pretty good option. and I have seen t56s mated to transfer cases, but I cant tell you where they got the parts from..
    Last edited by Lsx10; 08-10-2009 at 10:46 AM.
    s10 with 4l60e and cammed 5.3 on the road!THREAD
    "People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf.".

  4. #24
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Quote Originally Posted by ma.racing View Post
    anyone who iv ever talked to who has had a 80e tbrake seas that it responds real slow i dont no personally thats just what i have been told by alot of pep
    Thats funny because the Tbrake for an 80e just came out of development about a year ago. Send a PM to Casey23 and see how he likes his. He is the only person on this site that I know of that has a Tbrake in an 80e.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  5. #25
    Join Date
    Feb 2009
    Location
    mississippi
    Posts
    930
    Yes the quadra duse or what ever is a t56 and there has been pep who have mated the t56 to a t case but you have to make your on using a mustang tail shaft housing and it loooks like a whore to do the t5 may be a good idea tho I'll look into that has anyone ever seen one mated to a tcase
    04 1500 5.3L custom hp tuners tune by myself don have a pic of it yet so hear is my old 01 chevy 5.3 460hp 13.669 @ 116

  6. #26
    Join Date
    Feb 2009
    Location
    mississippi
    Posts
    930
    Iv hear a fue guys talk about it bein slow and bein nothing like a power glide tb
    04 1500 5.3L custom hp tuners tune by myself don have a pic of it yet so hear is my old 01 chevy 5.3 460hp 13.669 @ 116

  7. #27
    Join Date
    May 2009
    Location
    hot & windy
    Posts
    1,117
    i hate digging this one up, but it showed up when searching for 5spd & AWD

    Quote Originally Posted by GasGuzzler View Post
    BTW, the 3500 was used behind the 4 cylinder S-10 2.2 if that matters.
    nope, that was the NV1500 (don't use this weaksauce piece with a V8 - i don't even know if it'll bolt up)
    the S10 NV3500 was only with the 4.3 trucks, and it (the M50) had a closer gear set and longer tailshaft than the fullsize versions (MG5).

    as for an AWD swap, i know that the NP149 t-case is what was used in the Silverados/Denalis/Escalades and people have swapped to them from the NP246 Autotrac, but i think they have a different spline count than the typical 5spd manual t-case (NP241)
    00 FRC - just top end, exhaust, and a hot-air intake
    99 Sierra - 5.3 / 5spd
    ↓ click the pic for the build ↓

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts