72 C-10 LS1 swap need help

[fullthrottle]

The TV cable is a cable from the trans that connects into the valve body and to your throttle body. Most cases its used with a carb so linkage is much easier but you can modify your throttle body to have a bracket for the cable to hook onto im sure. This cable controls the shift pressure in your trans and it MUST be hooked up properly. I would recommend doing some indepth research on how to hook it up or get someone who really knows what they are doing. You can destroy a 700r4 in minutes if its not hooked up properly.

[70LSTRK]

question for sciv

only an inch hun that might work then im Z'ing my fame 3 inches do you have anny pics of how the headers fit?

[SCIV]

question for sciv

only an inch hun that might work then im Z'ing my fame 3 inches do you have anny pics of how the headers fit?

I don't. Try the 67-72 website link I posted. PLENTY of pics & info there.

[shane72]

Yea thanks on that heads up on the tv cable. I will look into that.

[r6z4o6]

What year is the 700R4 from?

[SCIV]

Here is a header special for you:

Herron Performance-Doug Thorley LSx headers-Till August 31 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

[70LSTRK]

those look sick

[fullthrottle]

What year is your 700r4? Is it 27 spline?

[shane72]

My 700r4 is a 99, spline not sure have to count it.

[shane72]

Dude thanks on that web sight that helps alot,and the headers look bad ass. I got one more for you do no if there is a way to make a return fuel into a none return?