DTC's in mh work truck??

[White Devil]

where is the knock sensor located? and is there a way to fix it without having to replace it?
and how can I fix that MAP voltage??
thanks!! btw, a mechanic checked all of the spark plugs cause he thought that could be a reason for the vibration of the truck, and the right side was completly DARK.. all 4 of them.. the left side was ok..

[lechez71]

where is the knock sensor located? and is there a way to fix it without having to replace it?
and how can I fix that MAP voltage??
thanks!! btw, a mechanic checked all of the spark plugs cause he thought that could be a reason for the vibration of the truck, and the right side was completly DARK.. all 4 of them.. the left side was ok..

there are two knock sensors and they are located under the intake on the engine valley, to replace them you have to remove the intake. im not to sure if the p0332 is the front or rear sensor. i had to replace mine twice. while the intake was off i replaced both knock sensors and the harness. this usually happens when you wash your motor. pm GASGUZZLER he helped me out when my sensors went bad, theres a way to check them with an omn meter.