Thanks for the comments
it's taken me two years to get it done, lol, well not actually working on it, but i should have done this a long time ago,

the hardest part so far was making the wooden bracket, trying to hold that heavy bitch compressor up while i measure,

next step, is to get those two pulleys mounted securely and a second bolt in the idle tension pulley. if you want to know, all i did was remove the two lower bolts from the tension pulley, swing it up about 90deg, and now i'll put a bolt and spacer going to the plate mounted to the head, it came out pretty nice and easy. Plus it's a snap to remove and put back together while i'm test fitting everything.

updates later this week,


allen