I have a magnaflow X muffler that a buddy gave me. I need to get some mandrel bent tubes so i can get the new tailpipes welded up and have the tips come out the side, in front of the rear tire.
I have a magnaflow X muffler that a buddy gave me. I need to get some mandrel bent tubes so i can get the new tailpipes welded up and have the tips come out the side, in front of the rear tire.
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!
check out a muffler shop for some old diesel exhaust, other then that summitracing.com is the other better option.
Are you needing 45's, 90's? and what size piping 3''?
2006 silverado SS....Clifford Jr...turbo coming soon
1970 Chevelle ly6 swap....d1 coming soon
i need some 45's and 90's, cuz im not sure how its going to lay out.. and 3 inch pipes.
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!
mandrelbends.com u bends are great
single digit street truck
for build info
http://www.ls1truck.com/forums/my-ga...cs-garage.html
The best advice I have ever heard:... Only take B( . Y . )ST advice from someone that is CURRENTLY running a turbo setup close to, or bigger than what you want......
summit
2002 Tahoe 4.8 - soon to be turbo'd - SOLD
1989 Mustang - LX Vert - 351W-TT - 2inches of dust covering it
2012 Raptor - 497rwhp at 10psi
If you aint breaking - you aint going fast enough
this would be cool, but almost 200 just for pipes.. http://www.mandrelbendingsolutions.c...-409-SS/Detail
Sponsored by Taylor Wires!
Sponsored by PowerMaster!!
Sponsored by FROZEN BOOST!
Sponsored by US Speedo!
Posting Permissions
Reply With Quote