crank case vent for turbo???

[blue0453]

I no that on the passenger side I need to unhook the vaccum going to throttle body and cap throttle body off and put filter on vaccum line. But what do I need to do to drivers side, my truck doesnt have the typical pcv valve you can pull out, its made into the valve cover??

[ducky]

I put a catch can on my driver side. I dont have a PCV system, but I dont have a breather either, im not getting much blow by also

[Sleaper]

I no that on the passenger side I need to unhook the vaccum going to throttle body and cap throttle body off and put filter on vaccum line. But what do I need to do to drivers side, my truck doesnt have the typical pcv valve you can pull out, its made into the valve cover??

There isn't a line running from the back of the driver's side valve cover to the intake?? You should be able to pull that off and cap the intake side and run a breather filter directly off of the valve cover.

[blue0453]

not really sure how to do that sure its simple just need some info, kb told me to cut vaccum line and go get a pcv valve with 2 nipples, one in and out and just splice it into the line. will this work??

[blue0453]

yeah i no that, Im talking about the line going into the drivers side valve cover, guess it is coming from the manifold??

[Sleaper]

yeah i no that, Im talking about the line going into the drivers side valve cover, guess it is coming from the manifold??

Yep, it goes from the driver's side valve cover to the intake. It allows the vapors to be passed back through to burn completely for emissions. If you don't need emissions, you can cut that line and plug it and the run a breather filter directly off of the valve cover.

[blue0453]

no emmissions here to worry about in ga. but if this will work that sounds easy enough. So this will let the crank case vent properlly??

[blue0453]

basically just putting filters on both valve covers, this is correct, right?? and just capping off the other ends??

[Sleaper]

no emmissions here to worry about in ga. but if this will work that sounds easy enough. So this will let the crank case vent properlly??

You can actually just run the one breather on the passenger side and it will vent fine. But yes, it will work if you are just wanting to vent both sides.

[blue0453]

thanx for the info,ramair, still learning about all the turbo stuff