+ Reply to Thread
Results 1 to 10 of 33

Thread: Djm 2 Inch Lowering Shackles

Hybrid View

  1. #1
    Join Date
    Nov 2008
    Location
    Paris, Texas
    Posts
    1,732
    belltech makes a kit to fix the lean. mine did it real bad, from always a full tank and my myself.

  2. #2
    Join Date
    May 2009
    Location
    Wichita Falls, TX
    Posts
    883
    so I'm just guessing but the top holes on the shackles will make the truck lower then the bottom holes. so if i need to change one side.....Then I need to bring the driver side up an inch. I don't think it will go any lower then it already is or I can use 2 inch drop hangers?

  3. #3
    Join Date
    May 2008
    Location
    Round Rock, TX
    Posts
    3,069
    ALL the chevy trucks lean...There is alot of extra weight on the Drivers side. Gearbox, steering column, gas tank, fuel lines, brake lines, abs unit, wiring, all this stuff adds up and the exhaust on the pass side doesn't offset it very well. Welcome to the world of the notorious lean..

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts