I just snagged a 2004 LS6 cam with less than 1k on it from ebay! Now I need help on the springs, Allen says the stock LS6 springs will compliment it great, but what are my options? Any help is greatly appreciated!
Chris
I just snagged a 2004 LS6 cam with less than 1k on it from ebay! Now I need help on the springs, Allen says the stock LS6 springs will compliment it great, but what are my options? Any help is greatly appreciated!
Chris
2009 Silverado, HPTuners, all stock.
They will and they are cheaper so you'll save some money...If it's anything to ya I was looking for some before I found some 918's for a good deal and I'm running almost .570 lift...
13.920 @ 98.94mph...[/b]
The LS6 springs will do just fine with that cam if not you can go with the manley springs and retainers like I did. It all depends on the money you want to spend. Good Luck!
97 GMC, 2002 LS6.
1991 GMC Syclone #1428
What are the other upgrades I will need for the swap? Will I need new retainers too, or just the springs.
Chris
2009 Silverado, HPTuners, all stock.
I would stay with the LS6 retainers or buy some new titanium ones. The stock retainer locks will work fine.
97 GMC, 2002 LS6.
1991 GMC Syclone #1428
I have a set of Comp 918's with around 6,000 miles on them. PM me if you are interested.
No more trucks, but this is what I used to have. 2000 GMC Sierra, 6.0L-LQ4, Built 4L60, LS6 Cam, The Other Guys Headers, 3 inch exhaust and 7 chamber flowmaster, 43lb injectors, Nelson Tuning, Drop - 3/4 McGaughys Spindles, Bell Tech Shackles & Hangers. Best time 13.59 @ 106
Posting Permissions
Reply With Quote
