the ls hot cam sounds good but i really like the sound of that thumpr
5/9 mchgys\belltech\boss 330\streetscene\reflexxion\flowmasters\servos\tune
Cammed,Stalled,lts,ory,elec cutout, 4.56,transgo,servos,flowstoppers,
soon to come a little shot of nitrous
im running the tr220, and i have to say that the power increase was pretty impressive. very happy with cam, but will probally be swapping soon because i am going fi.
Master power t-76 kbracing, Intercooled, 11psi, tr220 cam, patriot dual springs, 72lbrs, snow meth, walbro, efans, 80e, tansgo, yank 3200.
does any one have the parts number to the ls6 vavle springs?
Stunna, did you use a hardend pushrod? is there anything eles i should replace why im in there, lifters,rockers, timing chain? hell i dont kno
5/9 mchgys\belltech\boss 330\streetscene\reflexxion\flowmasters\servos\tune
Cammed,Stalled,lts,ory,elec cutout, 4.56,transgo,servos,flowstoppers,
soon to come a little shot of nitrous
GM part number 12499224??? yellow valve springs with retainers??
5/9 mchgys\belltech\boss 330\streetscene\reflexxion\flowmasters\servos\tune
Cammed,Stalled,lts,ory,elec cutout, 4.56,transgo,servos,flowstoppers,
soon to come a little shot of nitrous
no u just need to change them springs,i used my stock pushrods,they worked fine.
i got that part number off ebay for like $60 i get springs and retainers
5/9 mchgys\belltech\boss 330\streetscene\reflexxion\flowmasters\servos\tune
Cammed,Stalled,lts,ory,elec cutout, 4.56,transgo,servos,flowstoppers,
soon to come a little shot of nitrous
I dont see the since in not changing them since you have to pull them out anyways, and your only talking $120 bucks of insurence
Master power t-76 kbracing, Intercooled, 11psi, tr220 cam, patriot dual springs, 72lbrs, snow meth, walbro, efans, 80e, tansgo, yank 3200.