I take it you are using the old tranny? If so you will have to get a flywheel conversion from advance adapters i think the part number you need is 712500A and the only other thing with the tranny is that you would have to rig something up for your kick down. I also got the motor mounts from advace adapters but i have heard that there are better mounts out there so you can use the stock drive shafts. The headers that I am running are the ones from street and performance and they are the midlength ones they sell. You may have to modify the front crossmember a little so the pan doesnt rub. If there are any other questions that you have feel free to ask.