fuel pump not getting any power after swap

[passaphist]

I received a new relay with the new harness. I connected a wire that said fuel pump 12v+ to switched power. It only had 4 wires on the new relay comppared to the stock one having 5. So I took the one going to the pump itself (pink/black) and pinned it in the open spot on the new relay. Same spot as the stock one. The other 3 I didn't touch cause it looked like they went to the pcm

[LS1GMCTruck]

What fuel pump system did you go with?

[passaphist]

right now im running the stock pump and lines. so for everything is holding up. if it burns out then ill cross that bridge when i get there. i do have an adjustable fpr though

[LS1GMCTruck]

right now im running the stock pump and lines. so for everything is holding up. if it burns out then ill cross that bridge when i get there. i do have an adjustable fpr though

Sounds good. I take it, you worked out your fuel pump relay wiring issue.