4.8 to 6.2

[CHEVROLADE]

well thats what im going to do after all,finally made up my mind.i just need to know if theres anything else i need for this swap besides tune?ill be staying with 4l60e,wish i could do the 6spd auto,but the 6.2 is already expensive as it is.

stay tuned!! LS3 FTW...here lightning boys no more picking on me lol

[George C]

good luck with that motor. hopefully the market for those comes around and out shines their brothers

[CHEVROLADE]

Oh It Will Out Shine Like Nothing,400+hp On Tap,on Top Ill Be Adding A Cam As Well.dealer wants 6500.00 for vette ls3

[CHEVROLADE]

so all the sensors,plug ins,wiring the same?

[mean05]

Knock sensor need to be moved from the valley to the side of the motor....need to move the cam sensor plug to the front of the motor and switch the wires in the plug marks "A" & "C" also the LS3 is a 58x reluctor wheel so you will also need to either have a 24x put on it or i think they make a adapter for it now

[CHEVROLADE]

thanks for the info bro,i thought my 08' was a 58x?and i think it already has the cam sensor in front.ill doulbe check anyways.

[mean05]

thanks for the info bro,i thought my 08' was a 58x?and i think it already has the cam sensor in front.ill doulbe check anyways.

did not know yours was an 08...you should be fine on all the stuff i just posted then...my bad

[MidnightRider]

stay with the 4 speed auto heard to many horror stories about that 6 speed auto

[CHEVROLADE]

yea ill run the 4l60,what are some of them stories bout the 6speed?

[George C]

Oh It Will Out Shine Like Nothing,400+hp On Tap,on Top Ill Be Adding A Cam As Well.dealer wants 6500.00 for vette ls3

6500 is crazy for the peformance those motors offer. hell i dont even have 6500 into my 4.8 and turbo setup.

good luck tho