need of some pinouts

[92 6.0]

Here is a link to the fuse box connector.New Page 1
And I might be able to scan the wiring diagrams in my haynes manual that I used for my 92. Just let me know what ya need.

[93sixxoh]

Not trying to thread jack
But i need these pinouts as well. might try to get my gauges working this weekend if i got time. my gauges just sit there so theres no power

[mcgojosh]

Here is a link to the fuse box connector.New Page 1
And I might be able to scan the wiring diagrams in my haynes manual that I used for my 92. Just let me know what ya need.

I have the haynes also but i pulled a the pink and white 12v ignition wire out of the obs ecu connector by accident. I was hoping to find out what pin in the connector it is, to put it back in.

[92 6.0]

I have the haynes also but i pulled a the pink and white 12v ignition wire out of the obs ecu connector by accident. I was hoping to find out what pin in the connector it is, to put it back in.

Oh the best help I could be is to say just look at the diagram and find the ones closest to those two wires. By the way why do you need the obs ecu?