Ls1 Harland Sharp 1.8 Rockers

[Jamest]

I have some scorpions stock ratio I will trade with you?

[CHEVROLADE]

can u post a pic or link,never heard of em

[Jamest]

Scorpion Performance

The LS1 1.7's is what I have. They were only on a short while. I bought a different cam and just ended up using the stockers

Jamest

Let me see if I still have a pic on photobucket?

[whitesilvy04]

Hey bro how much lift will these add? Isnt it around .30 or .40ish?
My cam only has .525 / .535 of lift and want to increase that a bit.

to add up your lift you simple take your lift on your cam divide it by the stock ratio of the rocker arm which is 1.7 and whatever the number you come up with then times what ratio you are wanting to that number to get your overall lift for example

if your cam has .525 intake lift take .525 / 1.7 = 0.308 x 1.8ratio = your new intake lift would come out to .555

same goes for the exhaust... .535 / 1.7 = 0.314 x 1.8 ratio = new exhaust lift would be .566

Hope that helps.. and Free Bump

[Chevytruck]

to add up your lift you simple take your lift on your cam divide it by the stock ratio of the rocker arm which is 1.7 and whatever the number you come up with then times what ratio you are wanting to that number to get your overall lift for example

if your cam has .525 intake lift take .525 / 1.7 = 0.308 x 1.8ratio = your new intake lift would come out to .555

same goes for the exhaust... .535 / 1.7 = 0.314 x 1.8 ratio = new exhaust lift would be .566

Hope that helps.. and Free Bump

Would that require to change the push rods with changing the lift?

Kinda interested.......

[whitesilvy04]

you dont have to change the pushrods..

[jetmech]

still a good idea to put in hardened pushrods while you're in there......

[rubrhammer]

Will stock springs handle the extra lift on a stock cam?

[CHEVROLADE]

my buddy had no problems on his 08'5.3,stock springs too.TTT

[rubrhammer]

What type of improvement did he see on the stock motor?