I had it rebuilt and now it trys to slip from 2nd to third if i get one it. If i baby it, it does fine. im gonna start with a messed up servo seal.Originally Posted by txarkitekt
I had it rebuilt and now it trys to slip from 2nd to third if i get one it. If i baby it, it does fine. im gonna start with a messed up servo seal.
2000 Silverado ECSB- 5.3 CAI, Pacesetter LTs, ORY- Pipe, Magnaflow XL, E-fan, Ported T/B , Nelson Tuned, Built 4l60e, Circle D Stall, 3.42s G80, 2-4 Drop, Hertz Highs, Rockford 501s
2004 Buell XB12s
Well i dont know of any tuners local to me and in my lil town people dont know a whole lot about these newer style engines! If it dont have a carb there lost! Just going with the best option i have avalible right now. Anyway blue z your on thirdgen.org arent ya? Ive always thought that car was damn nice!
03 yukon xl:intake, longtubes ory,performabuilt lvl2,circle D 278,tune, tint, lt1 fans
92 z28: lb9 air foil vette servo magnaflow catback adjustable pan hard rod Lcas lcarbs
86 trans am: lm7 hot cam th350 3500 stall
3/4 clutches. Trust me. Happened to me twice in one month.
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
Oh, she's easy!
Some people like the HD-2, some like the Superior. Order at will...
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
It has 4th just fine. And the clutches were just put in last week. Nathan said it cant be the 3-4 clutches because I have 4th.
2004 Buell XB12s
Ya I've been on thirdgen.org for like 4 yrs or something. ThanksI'm gonna miss driving it, but the down time with the swap will be worth it.
It can be anything but may not be 3-4 clutches if 4th is OK. 3-4 clutch failures are common.
My guess for the OP with stall, tune, SK, servos, and weight reduction is 9.79 in the 8th in good air.
Yeah ill prob end up going with the hd-2 since thats what most have recomended. I figured about 9.9-10.0 with out stall so your guess is about on with mine. Ive been on thirdgen for about 4-5yrs also bluez! Plan on a lsx swap on my 86 ta someday for now it just sitson a good note my 82 is getting a hot lil 383 with brodix heads forged rods and pistons solid cam ect..
03 yukon xl:intake, longtubes ory,performabuilt lvl2,circle D 278,tune, tint, lt1 fans
92 z28: lb9 air foil vette servo magnaflow catback adjustable pan hard rod Lcas lcarbs
86 trans am: lm7 hot cam th350 3500 stall
Nice, that should be a good setup. The LSX swap would be awesome in your T/A also. I have been wanting to do an LS1 swap for a very long time, actually ever since I got the car back in 2003. I finally figured that it would be cheaper to get a truck block 6.0 and go that route, and it will end up making more power anyways haha
yeah ive had my 86 since 04 and always wanted a lsx swap especialy since it had a 200k+mile lg4 with 2.73's lol i started on it got all interior out and body stripped for paint and engine bay cleaned and sleared of clutter but thats as far as i got. bought the 82 to have another driver 3rdgen and well it needs no body and interior work so it gets to go fast first. shooting for low 11's in 1/4 with it. Ive got no 1/4 tracks near me so thats part of the reason i want to mod the yukon some to ease towing a car all over the place. i may end up going with a 4l60e or a 4l80e in the 86 instead of a t56 like i originaly wanted that would ease the swap to go auto again.
03 yukon xl:intake, longtubes ory,performabuilt lvl2,circle D 278,tune, tint, lt1 fans
92 z28: lb9 air foil vette servo magnaflow catback adjustable pan hard rod Lcas lcarbs
86 trans am: lm7 hot cam th350 3500 stall
Posting Permissions
Reply With Quote
