Hmmmm... Ok, I get it--they used the PCV stuff.
Weeeeeeell, I couldn't tell ya! I would say to try and replace the oil filler neck from the pass valve cover and see if that works. Its a cheap fix.
Let us know what you find out.
Rings are shot
Good ol' #7 to a dump
The tune, it's gotta be the tune!!
None of the above
Hmmmm... Ok, I get it--they used the PCV stuff.
Weeeeeeell, I couldn't tell ya! I would say to try and replace the oil filler neck from the pass valve cover and see if that works. Its a cheap fix.
Let us know what you find out.
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
Posting Permissions
Reply With Quote