Quote Originally Posted by Ramsey View Post
Ok then let me say it this way then .On MY engine when I went above 10 psi I was pushing oil out of the breathers on MY setup and IVE seen it on several other setups leaking out and stinking[fumescoming out of breathers] like a s.o.b..Thats two of the main reasons IVE seen people go to catch can setups. Now personally I dont like the stink so thats the reason i did it,the oil and condensation was also spitting on my headers causing this .so i would say everywere and excessive.Now without FORCED /INDUCTION lol,i cant tell ya.Its only an opinion i did say their are other ways that people like better.
well, personal preference is fine, i wont bust your balls over it. but not to be a dick or anything, but if your blowing allot of oil from the breathers, youv got allot more to worry abut then stink, you need to back off of the boost with those stock piston rings.

my stock motor started blowing oil form the breathers at 13 pounds of boost, it started about a month ago, the moor is now shot out and removed from the truck. boost kills stock motors, ease up on that 10 pounds and maybe you wont get so much blow by.