Bought a Kenne Bell.

[onequick5.3]

Guys I just bought a Kenne Bell supercharger. I know there not a Radix or STS, but I found a used complete kit and got a really good buy on it that I couldnt pass up. Now looking at Allens site I saw he has tuned some Kenne Bell equiped trucks before, so now after the charger arrives, im going to need some other things

1. Some TR6 plugs gapped at .035
2. Walbro 255lph inline pump (Were can I find one at?)
3. And a Nelson tune.

Since Im just getting a Nelson tune can I ditch the Kenne Bell electronics? Im planning on running 6psi for now and later getting meth injection and a pulley for around 11psi. First though I want to get the trans rebuilt and a small stall maybe a vig 2800 at the most. I have 3.42 gears now, any suggestions on what other gears might work well with the setup?

Its a 2000 RCSB 5.3, I will also have a different cam in the future as well since I have everything but the cam sitting in my garage. Suggestions on anything on my setup is appreciated. Oh I also have a trans cooler as well (a big one).

[bud8fan]

congrats on the booster...plugs you can get at the local parts store...fuel pump at racetronics and allen for tuning...im sure he will chime in on the electronics...you may have to get 44# injectors too which i think allen might have also...you will prolly want to keep the 3.42's...

[03Sierraslt]

The Kenne Bell Kits come with 44lb or 43lb injectors, I say this becuase I just got one and its in the mail. I know i am ditching the electronics and having allen set me up with a new tune for the Kenne Bell.