new times for the stepside

[badazzchevy327]

very nice , we trapped the same in 1/8 and 1/4 but you were a tenth faster in both. i spray a 150 out the hole as well. whats your stats on motor and suspension. when i pulled the wheel if it didnt tire shake bad i would have cut a 1.5 but it went 1.60 that time.

[DINK]

im all stock on suspension. i was surprized it was that good of a 60. it felt perfect comin off the line though. last time i was at the track it was 100 degrees and this time i went when it was cool and i ran 1/2 second better. my first pass i ran an 11.48 and the tech told me to slow down without a cage then my second pass i sprayed it off the line and got a 11.40. he told me i couldnt run again with out a cage. how hard is gonna b to put one in my truck? will they say anything to me at SAR?

[mean05]

supposed to be loose tech down at SAR

[badazzchevy327]

im all stock on suspension. i was surprized it was that good of a 60. it felt perfect comin off the line though. last time i was at the track it was 100 degrees and this time i went when it was cool and i ran 1/2 second better. my first pass i ran an 11.48 and the tech told me to slow down without a cage then my second pass i sprayed it off the line and got a 11.40. he told me i couldnt run again with out a cage. how hard is gonna b to put one in my truck? will they say anything to me at SAR?

very nice. your not lowered in any way? i have 2 inch drop spindle , 2 inch shackle , and i put shocks where my coilovers use to be. and i removed overload, besides that its all stock. i would have went with old shock placement but the tabs were cut off. lets just say the guy who did my laddaer bars did a number on it so i switched back.

and i have a 6 point on my truck with a speedglass back window. its good to 10.00 a simple 4 point with no rear bars is good to 11.0 i understand. incase you dont wanna go through with not having a glass window and losing the sleeper effect.

[Botlfed]

im all stock on suspension. i was surprized it was that good of a 60. it felt perfect comin off the line though. last time i was at the track it was 100 degrees and this time i went when it was cool and i ran 1/2 second better. my first pass i ran an 11.48 and the tech told me to slow down without a cage then my second pass i sprayed it off the line and got a 11.40. he told me i couldnt run again with out a cage. how hard is gonna b to put one in my truck? will they say anything to me at SAR?

just tell em you aint sprayin

[mean05]

Or just go to Ardmore...they have no tech at all

[Botlfed]

thats true

[GasGuzzler]

Or just go to Ardmore...they have no tech at all

...or any employees.

[DINK]

very nice. your not lowered in any way? i have 2 inch drop spindle , 2 inch shackle , and i put shocks where my coilovers use to be. and i removed overload, besides that its all stock. i would have went with old shock placement but the tabs were cut off. lets just say the guy who did my laddaer bars did a number on it so i switched back.

and i have a 6 point on my truck with a speedglass back window. its good to 10.00 a simple 4 point with no rear bars is good to 11.0 i understand. incase you dont wanna go through with not having a glass window and losing the sleeper effect.

not lowered or anything. i really dont wanna put anything in it. its an everyday driver lol. i guess im gonna have to though. i mite just fab up somethin.

[DINK]

just tell em you aint sprayin

and i wasnt sprayin that was all motor baby