I will appreciatte buddy! I just cant find any shops around here in Tucson to get that job done.. so if you have a chance I will really aprecciatte!
I will appreciatte buddy! I just cant find any shops around here in Tucson to get that job done.. so if you have a chance I will really aprecciatte!
06' Silverado RCSB 5.3L 4wd..
PERFORMANCE: Cam, Springs, Pushrods, P&P heads & 3 angle valve job, Injectors, PS LT's & ORY, Nelson Tune, Catback, CAI, Comp Cam Double Timing Chain, HP Oil Pump, UD Pullies, ARP bolts, Stall, TBS, 4.10's, Iridium NGK's, G-80, 160 t-stat, HD-2 & Vette Servo, 46,000 tranny cooler, 75-125hp shot of funny Gas..
HID's Hi, Lows & Fogs
Waiting to be installed: LC-1 WB & Standalone system
Yup, in Tucson..
06' Silverado RCSB 5.3L 4wd..
PERFORMANCE: Cam, Springs, Pushrods, P&P heads & 3 angle valve job, Injectors, PS LT's & ORY, Nelson Tune, Catback, CAI, Comp Cam Double Timing Chain, HP Oil Pump, UD Pullies, ARP bolts, Stall, TBS, 4.10's, Iridium NGK's, G-80, 160 t-stat, HD-2 & Vette Servo, 46,000 tranny cooler, 75-125hp shot of funny Gas..
HID's Hi, Lows & Fogs
Waiting to be installed: LC-1 WB & Standalone system
I'll have to get you the numbers when I get home...don't have em at work...but I will definitely get them for you.
T-RAV99 GMC | 5.3 | Skinny White Guy Tuned
Thanks man!! I´ll be waiting for them! appreciatte!
06' Silverado RCSB 5.3L 4wd..
PERFORMANCE: Cam, Springs, Pushrods, P&P heads & 3 angle valve job, Injectors, PS LT's & ORY, Nelson Tune, Catback, CAI, Comp Cam Double Timing Chain, HP Oil Pump, UD Pullies, ARP bolts, Stall, TBS, 4.10's, Iridium NGK's, G-80, 160 t-stat, HD-2 & Vette Servo, 46,000 tranny cooler, 75-125hp shot of funny Gas..
HID's Hi, Lows & Fogs
Waiting to be installed: LC-1 WB & Standalone system
hey man, I just found a place where they will do that job for $600.. and it will take them almost a week to have it done.. what do you all think?
06' Silverado RCSB 5.3L 4wd..
PERFORMANCE: Cam, Springs, Pushrods, P&P heads & 3 angle valve job, Injectors, PS LT's & ORY, Nelson Tune, Catback, CAI, Comp Cam Double Timing Chain, HP Oil Pump, UD Pullies, ARP bolts, Stall, TBS, 4.10's, Iridium NGK's, G-80, 160 t-stat, HD-2 & Vette Servo, 46,000 tranny cooler, 75-125hp shot of funny Gas..
HID's Hi, Lows & Fogs
Waiting to be installed: LC-1 WB & Standalone system
Too much.
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
cam springs and push rods, especially in a truck, should be around $350.00 in labor.
'92 GMC reg. cab, step side. 7.32@ 92.3. SOLD
http://videos.streetfire.net/video/d...d700c6401f.htm
New project: '00 S-10 ext. cab, ZQ8, 370, T-56, daily driver.
Hell--drive your ass to my house and I will do the cam swap for $350!
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
no, $600 just for port, polish, install the springs and pushrods, and 3 angle valve job..
and $400 for the cam swap, and install the stall..
06' Silverado RCSB 5.3L 4wd..
PERFORMANCE: Cam, Springs, Pushrods, P&P heads & 3 angle valve job, Injectors, PS LT's & ORY, Nelson Tune, Catback, CAI, Comp Cam Double Timing Chain, HP Oil Pump, UD Pullies, ARP bolts, Stall, TBS, 4.10's, Iridium NGK's, G-80, 160 t-stat, HD-2 & Vette Servo, 46,000 tranny cooler, 75-125hp shot of funny Gas..
HID's Hi, Lows & Fogs
Waiting to be installed: LC-1 WB & Standalone system
$1G????? wow......
ITS MATT SUCKA
98 rcsb dd
abosolutely nothin cept flo
& Nelson Tune
lookin for project
bangbangskeetskeet: how big is it v?
mean05: about 8''
txarkitekt: I will drink you under the table!
Posting Permissions
Reply With Quote
