Originally Posted by
pcmcobra
I swapped my 86 cluster with a 91 burb cluster. Had to repin it, was not hard. I have a spreadsheet somewhere...
After repinning, only thing you have to hook up from your harness is the speedo wire, and that pins into your cluster "plug".
I can email you my spreadsheet if you want, hope you can understand it. Best thing to do is if you have it, the cluster plug with all the wires from the 91 cluster, take out one wire at a time from your old "plug" and color match to new "plug". Hope that makes sense.
Let me know.
Thanks for the reply! I was afraid that I'd have to repin it. Unfortunately, I don't have the plug for the back on the '91 cluster. I bought the cluster off of ebay. However I did find a wiring schematic for what that plug should look like, on All Data. If you could send me that spreadsheet that would be great! I need all the help that I can get. My e-mail address is boltonbodydrop@gmail.com Thanks in advance!
Tiny
"Courage is not the absence of fear, its the ability to put your gear on and face the flames. This is not a game."
2001 Silverado ECSB - 4.3, 4L60E, K&N Drop in, 7" CST on 285/70/16's.
2001 GMC Sierra C3 AWD - Level'd up, 285/70/17, 6000k HID's, Kenwood Nav, K&N FIPK II, Flowmasters, & Stage III Hypertech. - TVS 2300 coming soon.
Reply With Quote