Would this be a good cam for a Procharger?

[onequick5.3]

Its the Combination Motorsports custom grind by comp cams

218/224 .563/.568 114

According to them its suppose to be a cam just made for supercharger applications I have TR pushrods and comp 918 springs and some other stuff..


Its going to be working with a Prochager P1SC 2 core intercooler
Before the cam I am gonna install the Procharger and 42 ib injectors and a custom tune with a Larger fuel pump along with the one that Procharger gives you.

Future plans, a built trans, and a 3200 vigilante and a Larger Griffin intercooler
with 3.6 pulley of course.

I also am going to keep the 3.42 becasue there will be ample power and I think I dont really need anything else and I love how they pull up top. Of course I will also have to get a Eaton posi as well

[Hit Man X]

Yes, good dual pattern and good overlap favoring boost/nitrous. I'd add that larger IC sooner than later, that stock IC sucks from ATI. The pressure drop is very poor.

Also remember the ATI is like a belt driven turbo, higher RPM = more boost... so you may want a 3600rpm stall or a 4.10:1 gear to get you into the higher RPM quicker. I'd go with a looser stall......