Torque Converter bolts, What size?

[dallas]

To be VERY clear Greg answered the question asked. Greg gave the specs of the bolt, shank diameter, thread pitch, and threaded shank length. I then answered both tool questions. Yes, I said "shank" and "tool" in the same post.

Thanks for the info guys, didnt expect that.. Just thought I would see if you knew.. It wont be fun getting the stripped one out.



" i bought new ARP converter bolts from summit for super cheap. "

Going to order a set today then...

[txarkitekt]

^^^ What he said. The OEM's have a 15mm hex and an 8mm (or 10mm??) allen key in the middle.

It wont be fun getting the stripped one out.

Please refer to Nathan's post. Are the inside Hex or Allen key threads stripped? Or is the outside of the bolt head stripped? There are two ways to skin this cat...

[dallas]

Please refer to Nathan's post. Are the inside Hex or Allen key threads stripped? Or is the outside of the bolt head stripped? There are two ways to skin this cat...

Sorry, I guess its the allen head and not the outside of the bolt. But I did make a mistake thinking they were the Torque style, not the allen.. It was too dark for me to tell i guess.. I should have it out today knowing I was doing it wrong