I got a 6.0 and 4L80E trans from a 2003 HD truck. When I install the trans Is there a way to eliminate the fly by wire or integrate it? Kind of lost on this part everything else is in order. Thanks for any help.
Swap vehicle 95 K1500 suburban 4x4
I got a 6.0 and 4L80E trans from a 2003 HD truck. When I install the trans Is there a way to eliminate the fly by wire or integrate it? Kind of lost on this part everything else is in order. Thanks for any help.
Swap vehicle 95 K1500 suburban 4x4
If you've got the powertrain from a 6.0 truck that was designed to use the drive by wire it's probably best to just go ahead and get the components to make it work. You'll need the throttel pedal, ETC control box that is mounted on the firewall, driver's side, and associated wiring.
1995 Chevy extended cab Z71 Silverado
2002 6L LQ9 Engine, 2001 4L80e transmission
http://www.pswired.com
AFAIK you'll just need a standard TB, throttle cable(s), reflash the computer, and well you'll have to check to see if the TPS and IAC plugs will work OR you'll have to find an older harness/get yours converted over.
At least that's what I can think of.
The superior man is modest in his speech, but exceeds in his actions. - Confucius
"He who asks of life nothing but the improvement of his own nature, is less liable than anyone else to miss and waste life."- Henri Frederic Amiel
'01 Chev Z71 LT - '85 BMW 745i TURBO - '88 BMW 750iL - '88 Ford F150 XLT Lariat - '79 MB 240D - '79 MB 280S Euro
'80 MB 380SE-5.0 Euro - '85 MB 300SD - '87 MB 300SDL - 1990 MB 300SEL - '91 MB 300SE - '91 MB 560SEL
Let's face it, the red hair... makes 'em wet.
Yes I know how to remedy the throttle body problem but I am wondering about the electronic shift pack on the side of the tranny? How will I make that work?
Posting Permissions
Reply With Quote
