debadge

[sprayedenali]

this all sounds easy enough. ill try it in the next couple days

[GasGuzzler]

Or a thumbnail works too....it's free. Set aside 6 hours.

[Red03SilSS]

lmao yeah that makes it a little easier and that eraser wheel is well worth buying, it just goes in the end of the drill and saves you a lot of heartache, i take these things off when i have to letter trucks and i have tried every known way

If you put the eraser wheel in the drill do not turn the drill on high speed. The wheels are only rated for a certain RPM and I have seen the fall apart before when put in a drill.

[Frenchy]

mine came with the factory with no badges, makes things easy

[Bass Fisherman]

You may want to try some braided fishing line (Stren Superbraid, Spider-Wire, etc.). It will have no stretch like monofilament (sp) and the "wound" fibers of the braided line will actually have a better cutting or serration action between the emblem and foam backing.

[05z71]

1. just pull badging or moulding off by simply peeling it off. 98% of the sticky tape came off with it when I did it this way.
2. spray a little WD40 on a rag and wipe off any other tape or residue.
3. wash truck, you are done.

[banker099]

u havent done this yet?...lazy

[sprayedenali]

u havent done this yet?...lazy

im back home for christmas, and it was raining every day until i left. but it will happen!!!

[sprayedenali]

well, i finally got around to doing this today. i also washed it and changed the oil, so my truck likes me alot today!!!

BEFORE:


AFTER:




I also moved the antenna under the hood...

[Big Tap]

Cleaned up well. Nice work!